24v Dc Power Controlled Variable Speed Freesea Aquarium Submersible
Water Pump
Application
1. Use in / under water or outside
2. The water pump uses the latest three-phase power with brushless
and sensorless control technology, which saves up to 60% energy.
3. Using closed impeller designs can be economically efficient to
improve lift and performance.
4. Quiet, suitable for fresh and sea water.
5. Ceramic shaft, wear resistance, no rust.
6. The outlet realize multi-stage over connection suitable for a
variety of pipe diameters.
Product description
DC 24V ultra-quiet submersible pump
Sturdy structure, high lifting height, removable cover
The pump is a complete solution for fountains, external filters,
any indoor or outdoor facility.
The water pump shaft and drive ring are made of silicon carbide
material.
It can be disassembled without tools. Install the pump vertically
or horizontally to suit your space. They have the power required to
make a large amount of water flow through your water feature.
The solid structure can extend the service life; it is not easy to
damage.
Low noise, ultra-quiet operation design.
Can be used in humid or dry environment.
Used in ponds, fountains, waterfalls, hydroponic systems,
irrigation systems.
Specification:
Voltage/frequency: 110V / 60Hz
Power: 60W
Output: 2245GPH, 8500L/H
Lifting height (maximum): 5.7m / 19ft
Power cord length: 4.3m / 14.3ft
Ideal for ponds, water gardens, fountains, aquariums, waterfalls,
statues, hydroponics and irrigation systems.
Easy installation
No tools are needed. You can easily replace the cigarette holder or
remove the protective cover for cleaning and maintenance.
Stable suction cup base
The suction cup base is stable enough to avoid tipping even when
operating under the highest pressure.
Submersible pump for koi ponds, waterfall fountains, fish tanks and
aquariums
| Model | Voltage | Power | Output | H-max | Size(mm) |
| XDC-3500 | DC24V | 25W | 3500L/H | 4M | 19 /25 |
| XDC-4500 | DC24V | 35W | 4500L/H | 4.5M | 19 /25 |
| XDC-4800 | DC24V | 40W | 4800L/H | 5M | 19 /25 |
| XDC-7000 | DC24V | 50W | 7000L/H | 6M | 20/25/30 |
| XDC-8500 | DC24V | 60W | 8500L/H | 6.5M | 20/25/30 |
| XDC-10000 | DC24V | 85W | 10000L/H | 7.5M | 20/25/30 |
| XDC-12000 | DC24V | 100W | 12000L/H | 6M | 30 /35 |
| XDC-15000 | DC24V | 120W | 15000L/H | 6M | 30 /35 |
| XDC-17000 | DC36V | 160W | 17000L/H | 7M | / |
| XDC-20000 | DC36V | 180W | 20000L/H | 7.5M | / |
Warning
For your own safety, please contact an electrical specialist if you
have any questions or problems!
Do not connect the power supply if all parts are not installed.
Do not use the pump in water temperatures above 35 ° C.
Only connect the pump to a power supply with ground contact. This
type of outlet must be set up in accordance with the relevant
national guidelines (vde.en ... iec etc.) to ensure that the ladder
extends to the pump.
When connecting to the power supply, pay attention to the voltage
indicated on the.
Electrical systems on garden ponds must comply with international
and national installation guidelines.
Only operate the pump when nobody is in the water!
Never lift / carry the pump by the cable.
The pump must not be operated if the cable or the housing is
defective!
Never displace liquids other than water.
Warning: the pump will automatically stop working if it is
overloaded or without water.
